Glass and Mirror Bevel Sizes

Bevel Size Standard Cross Reference

Please refer to the table below to see which thicknesses can be beveled on a specific thickness of glass.  Due to the physical differences between the straight line and shape machines, some wider bevels are not available on thinner glass.  If the width you want is not listed, then we do not normally fabricate that combination. If you need a non-standard size, we should be able to help, so please contact us for feasibility and pricing.

Thickness

3/32"

1/8"

5/32"

3/16"

1/4"

3/8"

1/2"

3/4"

1/2" Wide

na

straight only

yes

yes

yes

yes

yes

yes

3/4" Wide

na

na

yes

yes

yes

yes

yes

yes

1" Wide

na

na

yes

yes

yes

yes

yes

yes

1 1/4" Wide

na

na

straight only

straight only

yes

yes

yes

yes

1 1/2" Wide

na

na

na

na

yes

yes

yes

yes


Bevel Inside Corner Specifications

Our standard glass beveling machines have a minimum 2” inside radius limitation for polished edges and 3” inside radius for beveling.  Therefore Clearlight cannot do an exact inside right angle nor smaller radius curves.  The edge/bevel will follow the radius line as shown in dotted lines below, then it can be cut back to match the pattern.