Bevel Size Cross Reference
Please refer to the table below to see which thicknesses can be beveled on a
specific thickness of glass. Due to the physical differences between the
straight line and shape machines, some wider bevels are not available on
thinner glass. If the width you want is not listed, then we do not normally
fabricate that combination. If you need a non-standard size, we may be able to
help, so please contact us for feasibility and pricing.
|
Thickness
|
3/32"
|
1/8"
|
5/32"
|
3/16"
|
1/4"
|
3/8"
|
1/2"
|
3/4"
|
|
|
1/2" Wide
|
na
|
straight only
|
yes
|
yes
|
yes
|
yes
|
yes
|
yes
|
|
|
3/4" Wide
|
na
|
na
|
yes
|
yes
|
yes
|
yes
|
yes
|
yes
|
|
|
1" Wide
|
na
|
na
|
yes
|
yes
|
yes
|
yes
|
yes
|
yes
|
|
|
|
1 1/4" Wide
|
na
|
na
|
straight only
|
straight only
|
yes
|
yes
|
yes
|
yes
|
|
|
1 1/2" Wide
|
na
|
na
|
na
|
na
|
yes
|
yes
|
yes
|
yes
|
|
|
Bevel Specifications
Our standard glass beveling machines have a minimum 2” inside radius limitation for polished edges and 3” inside radius for beveling. Therefore Clearlight cannot do an exact inside right angle nor smaller radius curves. The edge/bevel will follow the radius line as shown in dotted lines below, then it can be cut back to match the pattern.
|
 |
| Standard Bevel Sizes |
|
|
|
