Industry Standard Tolerances
The following table reflects the industry standard tolerances for normal fabrication. Note that any glass to be inset should be ordered using plus zero / minus regular tolerance.
|
Operation / Thickness
|
3/32”
|
1/8”
|
5/32"
|
3/16”
|
1/4”
|
3/8”
|
1/2”
|
3/4”
|
|
Clean Cut, Seam (+/-)
|
1/16”
|
1/16”
|
1/16”
|
1/16”
|
1/16”
|
3/32”
|
3/32”
|
1/8”
|
|
Polish, Bevel (+/-)
|
1/16”
|
1/16”
|
1/16”
|
3/32”
|
3/32”
|
1/8”
|
3/16”
|
1/4”
|
Critical Tolerances
We can fabricate to more exacting tolerances if requested for an additional charge. Just let us know if you require +zero / -standard or +standard / -zero Although we can try, we cannot guarantee a hold dimension on 1/2”, or 3/4” glass due to possible in-flares when cutting these thicknesses of heavy glass.
|
|